Common construction methods for 3d wall panels

3d wall panels can be directly pasted with glue, without the need for cement. Commonly used glues for 3d wall panels include universal glue, nail-free glue, and double-sided glue. Commonly used tools include rulers, scissors, and scrapers. Next, let us understand the common construction methods of 3d wall panels. Here are some answers.

Here is the content list:

• Universal glue installation method. 

• Nail-free installation method. 

• Double-sided tape installation method. 

Universal glue installation method. 

The 3d wall panel installation method using universal glue as the glue has low cost, high efficiency, and strong adhesion. First, use a scraper to uniformly scrape the glue on the wall to enhance the firmness of the 3d wall panel and the wall. Secondly, apply glue with a width of 3mm and uniform thickness around the 3d wall panel. Keep the distance between the glue and the edge of the 3d wall panel about 2mm, and add 3-5mm glue at will. Wait 3-5 minutes after applying glue before sticking. Finally, if the glue overflows after pasting, it should not be wiped off immediately to avoid contamination. After the glue dries, use your fingers to remove it. Since the universal glue is not dry type, check the whole after connecting, and find that some of the lifted ones are pressed by hand until they are no longer lifted. If there is no glue, you need to replenish the glue before pressing.

Nail-free installation method. 

The 3d wall panel installation method avoids nail glue as the glue is simple, convenient, environmentally friendly, and firm. First of all, the nail-free glue can be glued directly on the 3d wall panel, without scraping the glue on the wall, or directly on the wall, without waiting for drying. Since the glue solidifies faster, the glue must be completed within one minute after the glue is applied. Keep glue with a width of 3mm and a uniform thickness around the 3d wall panel. Keep the glue and the edge of the 3d wall panel at a distance of about 2mm. The glue in the middle can be 35mm thick and thin. Secondly, after the glue is dry, use your fingers to remove the overflowing glue.

Double-sided tape installation method. 

The 3d wall panel installation method using double-sided tape as the glue is not only economical but also fast and environmentally friendly. First of all, the double-sided tape should be parallel to the edge of the 3d wall panel, so that it does not significantly exceed the 3d wall panel. Due to the strong adhesiveness of the tape, the double-sided tape after tearing off will be stretched and deformed and cannot be reused. In the middle, 2-3 pieces can be pasted at will according to the strong condition of the wall and the shape of the 3d wall panel. The wall with better effect should not be less than the total length of three meters. Secondly, the position of the 3d wall panel needs to be measured and compared before passing. Since the double-sided tape cannot be moved twice after being pasted, it needs to be aligned and pasted once.

Our official website is https://www.tangramdecor.com/. If you are interested in 3d wall panels, please feel free to contact us. We are confident that our high-quality products will satisfy you.