How to paste different Diy leather mosaics?
You are here: Home » Guide » How to paste different Diy leather mosaics?

How to paste different Diy leather mosaics?

Views: 0     Author: Site Editor     Publish Time: 2021-09-02      Origin: Site


facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

There are many kinds of Diy leather mosaic materials, and each Diy leather mosaic has its characteristics and construction methods. I believe everyone is also curious about Diy leather mosaics. If you want to know more about Diy leather mosaic, then take a look at the following content.

Here is the content list:

  • Paste Diy leather mosaic

  • The construction method of Diy leather mosaic for tiles

Paste Diy leather mosaic

Ensure that the surface of the Diy leather mosaic construction is flat and clean. After marking the baseline, apply cement or adhesive evenly on the construction surface of the Diy leather mosaic. Paste the Diy leather mosaics in order, leaving an appropriate gap between each piece. 

After pasting a piece of Diy leather mosaic, it will be flattened with wooden strips to ensure that every part of the Diy leather mosaic is compacted and fully integrated with the adhesive. The paper can be torn off the next day after the Diy leather mosaic or adhesive has dried. Wet the sticker with a sponge dampened in water, and then tear the paper after the sticker is completely wet. Use tools to fill the gaps with caulk or original glue, white cement, etc.

Clean the Diy leather mosaic. Use a wet sponge to clean up the excess caulking agent attached to the Diy leather mosaic, and then wipe it with a dry cloth to complete the construction step.

The construction method of Diy leather mosaic for tiles

First, remove the dust and dirt on the surface of the old tile Diy leather mosaic, and then use the tile Diy leather mosaic glue to make the basic application of the old tile. 

After the application is completed, you can directly paste the new tile Diy leather mosaic. Coat the back of the new tile with a thin layer of adhesive whose thickness is to cover the pattern on the back of the tile to make the new tile pole stronger.

When laying a new brick, hit the edge of the new brick with a rubber hammer to adjust the edge of the new brick Diy leather mosaic. Please note that the double leather mosaic expansion joints are retained. After the tile glue dries, connect the joints with a connecting agent. Some severely swollen or damaged tiles need to be removed. After disassembly, use surface treatment to repair it. After the surface is level with the old tiles, use tile glue to stick the new tiles more firmly.

Painting on old ceramic tiles or mosaic walls has higher requirements for wall flatness and putty layers. First, add water and stir the Diy leather mosaic tile surface treatment agent, and apply it evenly on the base layer of the old tiles in two batches. 

The above is a detailed introduction to some Diy leather mosaics, I hope it will be helpful to everyone. If you are interested in Diy leather mosaic, you can contact us. The company website is

Quick Links

Contact Information




Copyright  Putian Tangram Decorative Materials Co., LTD