What are the precautions for installing acoustic panels?
You are here: Home » Guide » What are the precautions for installing acoustic panels?

What are the precautions for installing acoustic panels?

Views: 0     Author: Site Editor     Publish Time: 2021-09-02      Origin: Site


facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

The acoustic panels have excellent characteristics such as lightweight, fire-resistant, flame-retardant, heat and sound insulation, waterproof and moisture-proof, non-deformation, easy construction, sound absorption, and noise reduction, so sound-absorbing panels are widely used in various building constructions. but if the installation method is wrong, it may fall off after a period of use, which will seriously affect the use of the acoustic panels. So, what are the precautions when installing acoustic panels? Next are some considerations.

Here is the content list:

  • Pay attention to the acoustic board treatment

  • Pay attention to installing the keel as required

  • Pay attention to the choice of glue

  • Pay attention to maintenance

Pay attention to the acoustic board treatment

For non-porous acoustical panels, the splicing gaps of the acoustic panels should be pasted with seam adhesive tape, and the perforated sound-absorbing panels should be sealed with thin films on the inner side of the acoustic panels.

Pay attention to installing the keel as required

The wall covered by the acoustic panels must be installed with keels according to the requirements of the design drawings or construction drawings, and the keels must be leveled. The surface of the keel should be flat, smooth, free of rust and deformation; the structural wall should be pre-constructed by the building code, and the arrangement of the keel must be compatible with the arrangement of the acoustic panels. The wood keel spacing should be less than 300mm, and the light steel keel spacing should not be greater than 400mm. The installation of the keel should be perpendicular to the length of the sound-absorbing board; the distance from the surface of the wooden keel to the base layer is by the specific requirements, generally 50mm. The flatness and verticality error of the wooden keel side surface should not be greater than 0.5mm; if fillers are needed in the keel gap, they should be installed and treated in advance according to the design requirements, and ensure that the installation of the acoustic panels is not affected.

Pay attention to choice of glue

When installing the acoustic panels, first consider using glue that meets the national environmental protection requirements. Different types of adhesives can be selected according to the base surface; the cement or wood base can be selected from styrene-free all-purpose glue or latex made of neoprene. ; Under the condition that the base surface of gypsum board is not susceptible to dampness, you can choose 100 latex or wallpaper glue with cellulose as raw material. Under the condition of easy or possible damp, you can choose all-purpose glue.

Pay attention to maintenance

First of all, if the surface of the acoustic panels is dirty, just use the surface of a vacuum cleaner or use a feather duster to sweep it. Try not to take the acoustic panels out and put them directly in the water for cleaning. Secondly, pay attention to keeping it clean to prevent the surface from being contaminated with oil or dust; avoid collisions and abrasion of corners; keep the environment clean, dry, and ventilated, and beware of moisture absorption and deformation of the acoustic panels. Finally, there is dust in the chute of the acoustic panels, remember to wipe it off gently, because sometimes you can't reach it, then you can use an old toothbrush to gently sweep out the dirt.

Our company is located in Putian City, Fujian Province, and has been committed to producing acoustic panels for many years. All products will undergo several experiments before they leave the factory. If you are interested in our products or engaged in related work, you can contact us. Our website is https://www.tangramdecor.com/.

Quick Links

Contact Information





Copyright  Putian Tangram Decorative Materials Co., LTD